![](https://staging.frilo.eu/wp-content/themes/blank/img/frilo-product-mockup.jpg)
Reinforced Concrete Corbel
B9+
The B9+ program can be used to design corbels loaded directly from above, i.e. corbels with direct load introduction. All necessary verifications are performed on the basis of a strut-and-tie model. A detailed output of the reinforcement can be generated.
Discover now more programs from the section Reinforced Concrete!
SHOW MOREMaterial
- Reinforced concrete of the strength classes C20/25 to C100/115
- Steel grades B500A, B500B, BSt 420 S(A)
Structural system
- Single-sided corbel
- Concrete cover variable on each side
- Consideration of bond conditions (e.g. for cast-in-place columns)
- Exact definition of the column reinforcement
- Transverse compression can be disabled
Loads
- Vertical load (concentrated load)
- Horizontal load
- Loads can be entered with any spacing
- Self-weight can be considered optionally
Verifications
The calculation is based on a framework model. The regulations of the different National Annexes are taken into account. The framework in this connection is a simplified strut-and-tie model.
The following verifications are performed:
- Safety against compressive web fracture
- Compressive strain under load
- Required As of the tensile and web reinforcement
- Anchorage and lap lengths of the reinforcement
- Internal forces in the corbel section
- Reinforcement dimensions in tabular form
Document file formats
- Word
- Printer
Output
- 3-d graphic
- Reinforcement drawing (optional)
Import options
- Frilo XML
Export options
- Word
- FRILO XML
Reinforced concrete
- DIN EN 1992
- ÖNORM EN 1992
- BS EN 1992
- PN EN 1992
- EN 1992
- NTC 1992
News
![Das Ingenieurbüro concon hat vom Umstieg auf die FRILO Suite profitiert.](https://staging.frilo.eu/wp-content/uploads/DE/Bilder/Testimonials/R5A_0093_16zu9-768x432.jpg)
“With the FRILO Suite, we benefit from the use of all programs”
With the switch to the FRILO Suite, the engineering office concon has decided to rely on the FRILO subscription model. The reasons of the long-standing customer are manifold.
![Die Hyparschale in Magdeburg nach der Anwendung des CARBOrefit®-Verfahrens (©CARBOCON)](https://staging.frilo.eu/wp-content/uploads/DE/Bilder/News/Produkte/Carbonbeton/DIEHYP1-1-768x432.jpg)
FRILO & CARBOrefit® | The calculation with carbon concrete pays off
With CARBOrefit® an process that enables renovation and reinforcement with carbon concrete has been integrated into the FRILO Software.